Skip to main content

Water lift

If one psi is required to lift a column of water 2.3 feet, then in a 3-story building with 10 feet floor-to-floor height, the water pressure needed at the basement of the building to flush a toilet on the third floor, operating at 15 psi is?

Answer30 feet/2.3= 13.04 psi) lift + 15 psi flush = 28 psi required water pressure.

ARE 4.0 exam prep: BS

Comments

  1. Megan4/25/11, 12:33 PM

    Technically if the toilet is on the third floor the rise from the base of the building to the toilet is 2 stories, so 20 feet. If the toilet is 30 high then it would be on the roof.

    ReplyDelete
  2. Building Simply4/25/11, 6:10 PM

    Good observation - I should clarify the base as basement. Thanks for commenting!

    ReplyDelete

Post a Comment

Try These Too!

Building Efficiency

Convert the usable area of classrooms planned with medium efficiency level of new construction to the gross building area given the following model factors: Net Assignable Square Feet: 10,000, Space Factor: 1.5, Building Efficiency Ratio: 67%
6 comments
See the answer »

Deflection: steel or wood

For EITHER steel or wood beams, a question that asks for the allowable deflection limit (maximum) for live loads only requires which of the following equations? A. L/240 B. L/360 C. ∆ = 5wl⁴ / 384EI D. ∆ = 5Wl³ / 384EI Answer B. L/360 or span in inches divided by 360. ARE 4.0 exam prep: SS Note on calculations: From posted discussions on AREforum , memorization of most equations is not advised. However, even when the equation may be available in in-exam reference, selection of the appropriate equation requires correct identification.
Post a Comment
See the answer »

Townships double post!

How many sections are contained within a township? Answer 36 (each is 1 mile square) What are the dimensions of 1/2 of a township? H & W Answer 18 miles square (3x6 sections) ARE 4.0 exam prep: SPD
4 comments
See the answer »