Skip to main content

Fire detection

Which of the following detector types can detect smoke or a smoldering fire that has not yet burst into flames?
A. Ionization
B. Rise-of-temperature
C. Photoelectric
D. Flame detectors


Answer

A and C

 For more ARE5.0 study resources see the  PPD-PDD page

Comments

Post a Comment

Try These Too!

Clear Floor Area

What is the clear floor area required for this front approach at an accessible water fountain? (yellow dash line) A. 36 x 60 B. 36 x 48 C. 30 x 48 D. 30 x 60 Answer C. 30 x 48. Although set in an alcove, the depth of the recess is not 24 inches or greater, which requires a 36 inch clear width. ARE 4.0 exam prep: SPD
Post a Comment
See the answer »

Bolted connections

What is the minimum spacing of bolts specified by AISC? and preferred spacing? A. 1 1/4 times the diameter of the bolt; 2 times preferred B. 1 3/4 times the diameter of the bolt; 2 1/4 times preferred C. 2 1/3 times the diameter of the bolt; 2 2/3 times preferred D. 2 2/3 times the diameter of the bolt; 3 times preferred E. 3 times the diameter of the bolt; 3.25 times preferred
Post a Comment
See the answer »

Refrigeration cycle

A water cooled liquid chiller (photo) performs which function in the refrigeration cycle for HVAC systems? A. thermal expansion valve, reducing pressure from the refrigerant's liquid state B. condenser cooling hot refrigerant with ambient air C. heat exchanger for liquid to cool air or equipment D. removes heat from liquid by vapor-compression or absorption refrigeration Answer D. removes heat from liquid by vapor-compression or absorption refrigeration. Industrial chillers may combine the chiller unit, condenser, pump station and expansion valve into a packaged unit. ARE 4.0 exam prep: BS
Post a Comment
See the answer »