Skip to main content

Spec coordination

In case there is a discrepancy between specifications and the drawings, which takes precedence?
AnswerNeither, A201 considers these - quote - complementary and what is required by one shall be binding as if required by all.- unquote.

ARE 4.0 exam prep: CDS

Comments

  1. architectstamp1/2/12, 11:00 AM

    in this case, the GC would make the claim if any discrepancy right? there is no other way around it?

    ReplyDelete
  2. Building Simply1/2/12, 1:27 PM

    There are a number of ways to resolve discrepancies between specs & dwgs, which do happen. The AIA provides some guidance here: http://info.aia.org/knowledgebase/Discrepancies_between_drawings_and_specifications.htm (see A503 section 1.2.1). A claim would be brought when a cost difference is the issue, but it certainly isn't the first remedy desired by any party, when a clarification can be sought by the GC and the Architect can provide one. The contractor has a duty to report errors discovered during review of contract docs and field conditions per A201 to the attention of the Architect. Inconsistencies don't automatically mean cost increase to the work. Likewise, there is not an established hierarchy governing discrepancies between drawings and specs.

    ReplyDelete

Post a Comment

Try These Too!

Building Efficiency

Convert the usable area of classrooms planned with medium efficiency level of new construction to the gross building area given the following model factors: Net Assignable Square Feet: 10,000, Space Factor: 1.5, Building Efficiency Ratio: 67%
6 comments
See the answer »

Deflection: steel or wood

For EITHER steel or wood beams, a question that asks for the allowable deflection limit (maximum) for live loads only requires which of the following equations? A. L/240 B. L/360 C. ∆ = 5wl⁴ / 384EI D. ∆ = 5Wl³ / 384EI Answer B. L/360 or span in inches divided by 360. ARE 4.0 exam prep: SS Note on calculations: From posted discussions on AREforum , memorization of most equations is not advised. However, even when the equation may be available in in-exam reference, selection of the appropriate equation requires correct identification.
Post a Comment
See the answer »

Facility parking

A new office complex is being planned, which is required to include 162 parking spaces. In addition to the parking spaces, allow for related driveways and walkways to estimate the area of the parking lot that would satisfy this number of spaces. A. 1.0 acres B. 1.5 acres C. 1.75 acres D. 2.0 acres Answer B. 1.5 acres. Multiply the required parking spaces by 400 sf per car (1 acre = 43,560 sf). If walkways are not required, use 300 sf per car. ARE 4.0 exam prep: SPD
Post a Comment
See the answer »