Skip to main content

FAR

For the lot below, the FAR is 2.4:
1. What is the maximum floor area developable?
2. How many stories would this permit on this lot?

Answer1. Maximum floor area = 19,200sf (100x80x2.4 = lot area times FAR), 2. # stories permitted by using max floor area within the setback (dashed lines) is 19,200sf = 4.26 stories (19,200/(75x60)=4.2666)

ARE 4.0 exam prep: CDS

Comments

  1. Aeterna7/9/11, 12:02 AM

    hi and thanks for setting up this site...

    I believe you subtracted the setbacks incorrectly.

    It should have been 60x75 as the footprint of the setbacks instead of 80x55. Therefore the answer should be 4.2666

    ReplyDelete
  2. Building Simply7/9/11, 8:17 PM

    Correct! and good catch! - it's updated now. Thanks Aeterna.

    ReplyDelete

Post a Comment

Try These Too!

Bolted connections

What is the minimum spacing of bolts specified by AISC? and preferred spacing? A. 1 1/4 times the diameter of the bolt; 2 times preferred B. 1 3/4 times the diameter of the bolt; 2 1/4 times preferred C. 2 1/3 times the diameter of the bolt; 2 2/3 times preferred D. 2 2/3 times the diameter of the bolt; 3 times preferred E. 3 times the diameter of the bolt; 3.25 times preferred
Post a Comment
See the answer »

Brick bonds

What distinguishes the English Bond pattern from the Dutch Bond pattern in this image? Answer In the English Bond, stretchers are aligned; In the Dutch (cross), stretchers move by a half each course (not aligned). ARE 4.0 exam prep: BDCS
Post a Comment
See the answer »

Collector walks

Walks next to parking areas where vehicles are able to overhang the walk should be a minimum width. What is this minimum in feet? A. 3 feet B. 4 feet C. 5 feet D. 6 feet Answer These walks should be 6 ft (D.) minimum in width. ARE 4.0 exam prep: SPD
Post a Comment
See the answer »