Skip to main content

Basic services

Door and window details are first typically included in the deliverables of which basic service phase?
A. Schematic Design
B. Design Development
C. Construction Document
D. Bid Phase
E. Construction Phase

AnswerB. Design Development, in addition to fully dimensioned floor plans, sections and elevations, as well as outline material specifications.

ARE 4.0 exam prep: CDS

Comments

  1. shortindiangirl2/16/11, 10:58 AM

    I'm not sure I'm getting this. Door and Window details in my mind are squarely part of CD's.

    ReplyDelete
  2. Building Simply2/16/11, 12:15 PM

    Yes - true as well. The word "first" should be inserted before "included". The guide for this question is from an AIA Best Practices article found here: http://soloso.aia.org/eKnowledge/Resources/PDFS/AIAP026834?dvid=4294964851

    ReplyDelete

Post a Comment

Try These Too!

Bolted connections

What is the minimum spacing of bolts specified by AISC? and preferred spacing? A. 1 1/4 times the diameter of the bolt; 2 times preferred B. 1 3/4 times the diameter of the bolt; 2 1/4 times preferred C. 2 1/3 times the diameter of the bolt; 2 2/3 times preferred D. 2 2/3 times the diameter of the bolt; 3 times preferred E. 3 times the diameter of the bolt; 3.25 times preferred
Post a Comment
See the answer »

Brick bonds

What distinguishes the English Bond pattern from the Dutch Bond pattern in this image? Answer In the English Bond, stretchers are aligned; In the Dutch (cross), stretchers move by a half each course (not aligned). ARE 4.0 exam prep: BDCS
Post a Comment
See the answer »

Collector walks

Walks next to parking areas where vehicles are able to overhang the walk should be a minimum width. What is this minimum in feet? A. 3 feet B. 4 feet C. 5 feet D. 6 feet Answer These walks should be 6 ft (D.) minimum in width. ARE 4.0 exam prep: SPD
Post a Comment
See the answer »