Skip to main content

Seating at tables or counter

A coffee shop is being planned with loose seating at tables and fixed seating at a counter. The clear width of an aisle separating these two arrangements must allow for _____ inches chair space from the edge of the table and _____ inches from the back of the stool. (Fill-in)



Answer 19 inches chair space and 0 inches from a fixed seat, such as this stool (clear width taken from back of stool)
are-review.blogspot.com

Code Note: Although the Schematic Design exam has no multiple-choice component, this type of example based on IBC requirements tests understanding of exit access design application, which is incorporated into the SD vignette through a fictitious code provided by NCARB. (Why a professional licensing exam is even testing a fictitious code is a separate question and ignominy.)

Comments

Post a Comment

Try These Too!

Bolted connections

What is the minimum spacing of bolts specified by AISC? and preferred spacing? A. 1 1/4 times the diameter of the bolt; 2 times preferred B. 1 3/4 times the diameter of the bolt; 2 1/4 times preferred C. 2 1/3 times the diameter of the bolt; 2 2/3 times preferred D. 2 2/3 times the diameter of the bolt; 3 times preferred E. 3 times the diameter of the bolt; 3.25 times preferred
Post a Comment
See the answer »

Thermal insulation

Which of the following types of thermal insulation can be blown into wall or ceiling cavities with least difficulty, but contains no adhesive properties? I. Cellulose II. Rock wool III. Vermiculite IV. Mineral wool V. Straw VI. Polyicynene Answer I, II and III are loose-fill types of insulation that can be blown. IV comes in batts, V can come in boards or bales, VI is a spray-foam that adheres to the cavity. ARE 4.0 exam prep: BS
Post a Comment
See the answer »

Imageability

Select 5 components that contribute to imageability , Lynch's concept that posits that a highly imageable city is readily understandable and distinct. A. districts B. social structure C. edge D. landmark E. nodes F. overlapping systems G. paths H. legibility Answer A, C, D, E, G are components that contribute to defining imageability. ARE 4.0 exam prep: PPP
Post a Comment
See the answer »