Skip to main content

Parking units

What are the car stall dimensions for a compact car?
AnswerA compact car stall size can be set by each municipality and therefore varies. Generally it is 7ft 6in wide by 15ft 0in long. However, in Fresno CA it's 8 1/2ft x 16ft and according to an Iowa urban design manual, it's 7ft 6in by 16ft.

ARE 4.0 exam prep: SPD

Comments

  1. The dimension in your answer is not always the case. Dimensions for a compact car stall varies according to jurisdiction.

    ReplyDelete
  2. Definitely, though NCARB exams are not that specific. This is a generic compact stall dimension. A similar reference can also be found in basic planning units provided in Ballast's Site Analysis chapter.

    ReplyDelete
  3. hello, your post on Mar 1 says 8' x 16' just got confused on what was really standard for compact cars. thanks!

    ReplyDelete
  4. Thanks - I've added clarification to the answer key. While compact car stalls differ slightly by municipality, standard stalls can as well. An accepted standard size to keep in mind is 9ft x 18ft (sometimes 19ft).

    ReplyDelete

Post a Comment

Try These Too!

Structural forces

Choose a term that best identifies the type of force shown in this diagram - A. collinear B. concurrent C. nonconcurrent D. noncoplanar

Roof pitch

Which one of the following slopes in this illustration corresponds with an 8:12 pitch roof? A. 45° B. 36.87° C. 33.69° D. 26.57°

Bolted connections

What is the minimum spacing of bolts specified by AISC? and preferred spacing? A. 1 1/4 times the diameter of the bolt; 2 times preferred B. 1 3/4 times the diameter of the bolt; 2 1/4 times preferred C. 2 1/3 times the diameter of the bolt; 2 2/3 times preferred D. 2 2/3 times the diameter of the bolt; 3 times preferred E. 3 times the diameter of the bolt; 3.25 times preferred