Skip to main content

Parking units

What are the car stall dimensions for a compact car?
AnswerA compact car stall size can be set by each municipality and therefore varies. Generally it is 7ft 6in wide by 15ft 0in long. However, in Fresno CA it's 8 1/2ft x 16ft and according to an Iowa urban design manual, it's 7ft 6in by 16ft.

ARE 4.0 exam prep: SPD

Comments

  1. Unknown4/27/11, 7:32 PM

    The dimension in your answer is not always the case. Dimensions for a compact car stall varies according to jurisdiction.

    ReplyDelete
  2. Building Simply4/27/11, 8:41 PM

    Definitely, though NCARB exams are not that specific. This is a generic compact stall dimension. A similar reference can also be found in basic planning units provided in Ballast's Site Analysis chapter.

    ReplyDelete
  3. architectstamp11/12/11, 12:45 PM

    hello, your post on Mar 1 says 8' x 16' just got confused on what was really standard for compact cars. thanks!

    ReplyDelete
  4. Building Simply11/12/11, 4:22 PM

    Thanks - I've added clarification to the answer key. While compact car stalls differ slightly by municipality, standard stalls can as well. An accepted standard size to keep in mind is 9ft x 18ft (sometimes 19ft).

    ReplyDelete

Post a Comment

Try These Too!

AIA Code of Ethics & Professional Conduct

The Code consists of three tiers of statements. Match them with an intent: I   Canon II  Ethical Standard III Rule of Conduct a: specific goals, which Members should strive to meet in professional performance b: mandatory, a violation of which is grounds for disciplinary action by the AIA c: broad principles of conduct Answer Ic, IIa, IIIb ARE 4.0 exam prep: PPP
Post a Comment
See the answer »

Zoning terminology

What is the term for the maximum three-dimensional space on a zoning lot within which a structure can be built, as allowed by applicable height, setback and yard controls? Answer Zoning envelope or building envelope.
Post a Comment
See the answer »

Building Efficiency

Convert the usable area of classrooms planned with medium efficiency level of new construction to the gross building area given the following model factors: Net Assignable Square Feet: 10,000, Space Factor: 1.5, Building Efficiency Ratio: 67%
6 comments
See the answer »