Skip to main content

Foundation piles 1

Four 12 inch diameter piles (each of whose frictional capacity is 300 psf) support a column carrying 120 kips total load.

What is the frictional area required for each pile?
A. 30 sf
B. 40 sf
C. 70 sf
D. 100 sf

AnswerD. 100sf. Each pile supports 30 kips (120 kips / 4), when divided by the frictional capacity (30 kips / 0.300 kips per sf = 100 sf) gives the required frictional area 100 sf


ARE 4.0 exam prep: SS

Comments

Post a Comment

Try These Too!

Building Efficiency

Convert the usable area of classrooms planned with medium efficiency level of new construction to the gross building area given the following model factors: Net Assignable Square Feet: 10,000, Space Factor: 1.5, Building Efficiency Ratio: 67%
6 comments
See the answer »

Spec coordination

In case there is a discrepancy between specifications and the drawings, which takes precedence? Answer Neither, A201 considers these - quote - complementary and what is required by one shall be binding as if required by all.- unquote. ARE 4.0 exam prep: CDS
2 comments
See the answer »

Shoring

A slurry wall is a narrow trench filled with a slurry mixture composed of bentonite clay and water, enabling it to resist pressure from the surrounding earth. What type temporary support is this? A. Bracing B. Sheeting C. Underpinning Answer B. It is a type of sheeting. ARE 4.0 exam prep: SPD
2 comments
See the answer »