Skip to main content

Roof slope

In this illustration, there are multiple drainage slopes at this roof, which must be checked against the allowable minimum. Where should the minimum slope be measured?
A.
B.
C.

AnswerB. is the intersection of the two slopes and will produce the shallowest slope of the roof. Measure the minimum from here.
ARE 4.0 exam prep: BDCS

Comments

Post a Comment

Try These Too!

Building Efficiency

Convert the usable area of classrooms planned with medium efficiency level of new construction to the gross building area given the following model factors: Net Assignable Square Feet: 10,000, Space Factor: 1.5, Building Efficiency Ratio: 67%
6 comments
See the answer »

Vapor retarders

In this section, a ceiling assembly separates the attic space above from the room interior below. If the building is located in Lewisville, Texas (hot-humid zone), where is the predicted location of condensation and what is the predicted condition of the gypsum board in this assembly? (Select 2 from the following) A. outside face of vapor retarder B. inside face of vapor retarder C. gypsum board will be wet D. gypsum board will be dry
2 comments
See the answer »