Skip to main content

Efficient columns

The radius of gyration in the Y-Y axis would be equal to that in the X-X axis in an ideally efficient column. Which of the following sections are most appropriate for both heavy loads and for which many beam connections will be necessary?
A. pipe column
B. square tube column
C. wide-flange column
D. C-shape channel
E. WT shapes

AnswerC. wide-flange column. Pipe & square tube columns are more ideal shapes, but are appropriate for light to moderate loads. The radius of gyration of wide-flange shapes can be nearly or close to equal.

ARE 4.0 exam prep: SS

Comments

Post a Comment

Try These Too!

Bolted connections

What is the minimum spacing of bolts specified by AISC? and preferred spacing? A. 1 1/4 times the diameter of the bolt; 2 times preferred B. 1 3/4 times the diameter of the bolt; 2 1/4 times preferred C. 2 1/3 times the diameter of the bolt; 2 2/3 times preferred D. 2 2/3 times the diameter of the bolt; 3 times preferred E. 3 times the diameter of the bolt; 3.25 times preferred
Post a Comment
See the answer »

Brick bonds

What distinguishes the English Bond pattern from the Dutch Bond pattern in this image? Answer In the English Bond, stretchers are aligned; In the Dutch (cross), stretchers move by a half each course (not aligned). ARE 4.0 exam prep: BDCS
Post a Comment
See the answer »

Collector walks

Walks next to parking areas where vehicles are able to overhang the walk should be a minimum width. What is this minimum in feet? A. 3 feet B. 4 feet C. 5 feet D. 6 feet Answer These walks should be 6 ft (D.) minimum in width. ARE 4.0 exam prep: SPD
Post a Comment
See the answer »