Skip to main content

Artificial Lighting


This method of calculating artificial lighting is NOT typically used for office and commercial spaces and does not make use of a coefficient of utilization for each fixture type taking into account reflectances of surrounding room zones.
A. point grid method
B. zonal cavity method
C. room cavity method
D. lumen method
AnswerA. point grid method does not attempt to account for surface reflectivity and comparative volumes within the room.

ARE 4.0 exam prep: BS

Comments

Post a Comment

Try These Too!

Bolted connections

What is the minimum spacing of bolts specified by AISC? and preferred spacing? A. 1 1/4 times the diameter of the bolt; 2 times preferred B. 1 3/4 times the diameter of the bolt; 2 1/4 times preferred C. 2 1/3 times the diameter of the bolt; 2 2/3 times preferred D. 2 2/3 times the diameter of the bolt; 3 times preferred E. 3 times the diameter of the bolt; 3.25 times preferred
Post a Comment
See the answer »

Roof pitch

Which one of the following slopes in this illustration corresponds with an 8:12 pitch roof? A. 45° B. 36.87° C. 33.69° D. 26.57°
Post a Comment
See the answer »

Building Efficiency

Convert the usable area of classrooms planned with medium efficiency level of new construction to the gross building area given the following model factors: Net Assignable Square Feet: 10,000, Space Factor: 1.5, Building Efficiency Ratio: 67%
6 comments
See the answer »