Skip to main content

ADA door clearance


What is the minimum clear depth and width for a push side / hinge side approach of this swinging door if it has both latch and closer?

AnswerDepth = 48, Width = 54, depth would be 42 without latch and closer
ARE 4.0 exam prep: CDS

Comments

  1. Unknown11/9/17, 8:04 PM

    Thank you for all the knowledge you distribute,Good post. I was very interested in the article
    Sliding Glass Door Window Replacement
    Windows And Doors Phoenix

    ReplyDelete

Post a Comment

Try These Too!

Roof pitch

Which one of the following slopes in this illustration corresponds with an 8:12 pitch roof? A. 45° B. 36.87° C. 33.69° D. 26.57°
Post a Comment
See the answer »

Bolted connections

What is the minimum spacing of bolts specified by AISC? and preferred spacing? A. 1 1/4 times the diameter of the bolt; 2 times preferred B. 1 3/4 times the diameter of the bolt; 2 1/4 times preferred C. 2 1/3 times the diameter of the bolt; 2 2/3 times preferred D. 2 2/3 times the diameter of the bolt; 3 times preferred E. 3 times the diameter of the bolt; 3.25 times preferred
Post a Comment
See the answer »

Floor receptacles

To qualify as one of the required power receptacles in a dwelling, according to NEC, what is the maximum distance from the wall that this recessed or surface-mounted floor receptacle close to an exterior wall may be? Answer Less than or equal to 18 inches. Additional requirements apply, such as approved floor box housing, cover... ARE 4.0 exam prep: BS
Post a Comment
See the answer »