Skip to main content

Townships double post!

How many sections are contained within a township?
Answer36 (each is 1 mile square)
What are the dimensions of 1/2 of a township? H & W
Answer18 miles square (3x6 sections)

ARE 4.0 exam prep: SPD

Comments

  1. liz.wu3/5/11, 2:05 PM

    if a township is 6 mi x 6 mi (36 mi square
    ), wouldn't 1/2 a township 3 mi x 6 mi (18 mi square)?

    ReplyDelete
  2. Building Simply3/6/11, 12:53 PM

    Yes, thanks! updated now

    ReplyDelete
  3. Anonymous6/9/11, 10:29 PM

    Hi. The site is great! Thank you for starting it. Some of the answers aren't visible when I hover over them, however. Is there another way to view them?
    Thanks again. I know people really appreciate it.

    ReplyDelete
  4. Building Simply6/10/11, 7:40 AM

    Hi - some posts use an older pop-up tool, which delays then shows the answer for 5 seconds. I'm still converting the remaining older answers to the new tooltip (which shows the answer as long your mouse is over it.) I'm glad the site is useful - visit often! And good luck on exams!

    ReplyDelete

Post a Comment

Try These Too!

Structural forces

Choose a term that best identifies the type of force shown in this diagram - A. collinear B. concurrent C. nonconcurrent D. noncoplanar
Post a Comment
See the answer »

Roof pitch

Which one of the following slopes in this illustration corresponds with an 8:12 pitch roof? A. 45° B. 36.87° C. 33.69° D. 26.57°
Post a Comment
See the answer »

Bolted connections

What is the minimum spacing of bolts specified by AISC? and preferred spacing? A. 1 1/4 times the diameter of the bolt; 2 times preferred B. 1 3/4 times the diameter of the bolt; 2 1/4 times preferred C. 2 1/3 times the diameter of the bolt; 2 2/3 times preferred D. 2 2/3 times the diameter of the bolt; 3 times preferred E. 3 times the diameter of the bolt; 3.25 times preferred
Post a Comment
See the answer »