Skip to main content

Building Efficiency

Convert the usable area of classrooms planned with medium efficiency level of new construction to the gross building area given the following model factors:
Net Assignable Square Feet: 10,000, Space Factor: 1.5, Building Efficiency Ratio: 67%


Answer: Gross building area (GSF) = 15,000 sf. Either factor can be used to find the answer - 10,000 x 1.5 = 15,000sf or 10,000 / 0.66667 = 15,000sf (+/-)
are-review.blogspot.com

Comments

  1. Anonymous11/26/11, 11:10 PM

    question about this...the answer to this question is the gross area, but the question seemed like it was asking something else. also, it looks like the space factor wasn't needed to answer this question. why?

    ReplyDelete
  2. Building Simply11/27/11, 10:03 AM

    Like many potential exam questions, the wording of this one includes superfluous information that is unnecessary to finding the answer. The question asks to find the gross building area from the usable area of the classrooms.

    ReplyDelete
  3. Unknown1/28/13, 6:33 PM

    The calcs in the answer are incorrect. Using the Building Efficiency Ratio to calculate the Gross Sq Ft you have to divide 10,000 by .67 not multiply.

    ReplyDelete
  4. Building Simply2/3/13, 11:57 AM

    Thanks Joshua! I just updated the answer notation.

    ReplyDelete
  5. Jason in Chesapeake2/7/13, 2:09 PM

    I really appreciate the site, I find the example questions very useful in reviewing for the ARE tests, when the answer is viewable.

    Is it just me, or when you hover over the Answer is some of the answer cut off or sometimes shows up blank all together?

    Let me know if there is something I should be doing differently...thanks!

    ReplyDelete
    Replies
    1. Building Simply3/2/13, 2:11 PM

      Hi Jason, very glad the site is useful to you. Some browsers don't seem to show the answers all the time. Try Firefox, Chrome, or Safari. Internet Explorer works if it's IE9 or later. Thanks for visiting!

      Delete

Post a Comment

Try These Too!

Spec coordination

In case there is a discrepancy between specifications and the drawings, which takes precedence? Answer Neither, A201 considers these - quote - complementary and what is required by one shall be binding as if required by all.- unquote. ARE 4.0 exam prep: CDS
2 comments
See the answer »

Footing cross-section

When the thickness of a foundation wall = 6", the cross-sectional proportions in this image are appropriate for which of the following: A. a footing supported on clay soil B. light frame construction supporting one floor and one roof C. allowable bearing capacity of foundation soil is low in relation to building loads D. when a continuous footing is required Answer B. light frame construction supporting one floor and one roof (in accordance with Table 1805.4.2) ARE 4.0 exam prep: PPP
Post a Comment
See the answer »