Skip to main content

Irregularity

Identify the condition of vertical irregularity in this illustration.

AnswerIn-plane discontinuity in vertical lateral-force resisting elements - that is offset of structural elements. Shear walls transfer loads to the foundation, but the capacity to do so is interrupted in this condition of random windows and openings.
ARE 4.0 exam prep: SS

Comments

Post a Comment

Try These Too!

Systems costs

In a small office building (20,000sf), what is a reasonable breakdown of mechanical and electrical systems by percentage of total budget (projected cost = $2.5 million)? A. mech 10% / elec 5% B. mech 15% / elec 10% C. mech 20% / elec 10% D. mech 10% / elec 10% Answer D. mech 10% / elec 10%. A typical small office building project allocates equal percentages on mechanical and electrical systems for a total of 20% of the projected costs. ARE 4.0 exam prep: BS
Post a Comment
See the answer »

Clear Floor Area

What is the clear floor area required for this front approach at an accessible water fountain? (yellow dash line) A. 36 x 60 B. 36 x 48 C. 30 x 48 D. 30 x 60 Answer C. 30 x 48. Although set in an alcove, the depth of the recess is not 24 inches or greater, which requires a 36 inch clear width. ARE 4.0 exam prep: SPD
Post a Comment
See the answer »

Bolted connections

What is the minimum spacing of bolts specified by AISC? and preferred spacing? A. 1 1/4 times the diameter of the bolt; 2 times preferred B. 1 3/4 times the diameter of the bolt; 2 1/4 times preferred C. 2 1/3 times the diameter of the bolt; 2 2/3 times preferred D. 2 2/3 times the diameter of the bolt; 3 times preferred E. 3 times the diameter of the bolt; 3.25 times preferred
Post a Comment
See the answer »