Skip to main content

Allowable stress

Identify this code requirement for allowable stress in steel, where F? = 0.60Fy
(Choose 2)
A. For tension on the gross area
B. For shear on gross sections
C. Where a beam is not a compact section but supported laterally, for bending
D. For tension on the net effective area
E. Shear stress at beam end connections where failure happens thru the fasteners along a plane

AnswerCode requirements for A (Ft) and C (Fb) are both =0.60Fy. B: Fb=0.40Fy, D: Ft=0.50Fu. E: Fv=0.30Fy
ARE 4.0 exam prep: SS

*Updated

Comments

Try These Too!

Structural forces

Choose a term that best identifies the type of force shown in this diagram - A. collinear B. concurrent C. nonconcurrent D. noncoplanar

Roof pitch

Which one of the following slopes in this illustration corresponds with an 8:12 pitch roof? A. 45° B. 36.87° C. 33.69° D. 26.57°

Bolted connections

What is the minimum spacing of bolts specified by AISC? and preferred spacing? A. 1 1/4 times the diameter of the bolt; 2 times preferred B. 1 3/4 times the diameter of the bolt; 2 1/4 times preferred C. 2 1/3 times the diameter of the bolt; 2 2/3 times preferred D. 2 2/3 times the diameter of the bolt; 3 times preferred E. 3 times the diameter of the bolt; 3.25 times preferred