Skip to main content

Measuring moisture in concrete

Which of the following tests measures moisture in a concrete slab by measuring moisture emission in a non-destructive relative humidity test of a confined pocket of air immediately above a concrete surface?
A. polyethylene sheet test
B. electrical resistance test
C. hygrometer test
D. protimeter relative humidity test
AnswerC. hygrometer test or relative humidity test uses a sensor in an entrapped air-pocket space. Protimeter RH testing is a destructive method inserting the probe in a pre-drilled hole.

ARE 4.0 exam prep: BDCS

Comments

Post a Comment

Try These Too!

Bolted connections

What is the minimum spacing of bolts specified by AISC? and preferred spacing? A. 1 1/4 times the diameter of the bolt; 2 times preferred B. 1 3/4 times the diameter of the bolt; 2 1/4 times preferred C. 2 1/3 times the diameter of the bolt; 2 2/3 times preferred D. 2 2/3 times the diameter of the bolt; 3 times preferred E. 3 times the diameter of the bolt; 3.25 times preferred
Post a Comment
See the answer »

Brick bonds

What distinguishes the English Bond pattern from the Dutch Bond pattern in this image? Answer In the English Bond, stretchers are aligned; In the Dutch (cross), stretchers move by a half each course (not aligned). ARE 4.0 exam prep: BDCS
Post a Comment
See the answer »

Collector walks

Walks next to parking areas where vehicles are able to overhang the walk should be a minimum width. What is this minimum in feet? A. 3 feet B. 4 feet C. 5 feet D. 6 feet Answer These walks should be 6 ft (D.) minimum in width. ARE 4.0 exam prep: SPD
Post a Comment
See the answer »