Skip to main content

Human scale

Typical measurements for the human form are useful to learn (in estimating width allowances, elevator capacities, space clearances...) A typical male shoulder width is which of the following?
A. 1'-6", B. 1'-8", C. 1'-10", D. 2'-0", E. 2'-2"


Answer B. 1'-8" is correct.
are-review.blogspot.com

Comments

Post a Comment

Try These Too!

Footing cross-section

When the thickness of a foundation wall = 6", the cross-sectional proportions in this image are appropriate for which of the following: A. a footing supported on clay soil B. light frame construction supporting one floor and one roof C. allowable bearing capacity of foundation soil is low in relation to building loads D. when a continuous footing is required Answer B. light frame construction supporting one floor and one roof (in accordance with Table 1805.4.2) ARE 4.0 exam prep: PPP
Post a Comment
See the answer »

Bolted connections

What is the minimum spacing of bolts specified by AISC? and preferred spacing? A. 1 1/4 times the diameter of the bolt; 2 times preferred B. 1 3/4 times the diameter of the bolt; 2 1/4 times preferred C. 2 1/3 times the diameter of the bolt; 2 2/3 times preferred D. 2 2/3 times the diameter of the bolt; 3 times preferred E. 3 times the diameter of the bolt; 3.25 times preferred
Post a Comment
See the answer »

Exit corridors

An alcove (recess) along an exit corridor partially accommodates the swing of a door opening onto the path of egress travel, reducing its clear width. When fully opened, what is the maximum projection of the door that is allowed into the corridor? Answer 7 inches maximum. ARE 4.0 exam prep: CDS
Post a Comment
See the answer »